Calvert hot tub Circulation pumps

Calvert hot tub Circulation pumps

Hot Tub Filters Unlimited

Calvert Circulation Pumps

E-Mail us orderdesk@hottub-filters.com

Attention!
When ordering your replacement Calvert hot tub circulation pump, please pay particular attention
to the nameplate information on the original pump and make sure that information matches one of the
lines below. Failure to do so may cost you another service call and possibly the cost of the pump.
If you are not sure, call us for assistance for proper matchup.

Ultima hot tub Circulation Pump
1/12HP 120V 1.5 in. Ctr/Side(Grey Imp.)
Manf. # 1014171

PUUL08138H
34-430-1900

These circulation pumps use a space saving 1/12 Hp single speed motor.
The Ultima wet end is equipped with 3/8 in. barbs for use with an optional heat jacket.
Connections are 1-1/2 in. QD union fittings–center suction and side discharge Connection 1-1/2 in.QD ctr/side
HP 1/12
Volts 120v
Amps 2.3am

Price $ 217.93

Calvert S225-50 circulation Pump (1-Pc Volute) 50 ft. Cord
Manf. # S225-50

34-325-1005

Description
Stainless Steel and Bronze Submersible hot tub pumps
This is suitable for use in salt water, chlorinated water, fresh water,
and hot water. These pumps are also thermally protected, can be used in
open air, operate very quietly, and are suitable in a wide range of applications.
Standard cord length is 6 ft unless otherwise indicated. Comes with 50ft cord.
Flow 225GPH
Suction 1/2 in. npt
Discharge 1/4 in.npt
Amps.7amp

Price $ 224.86

	Calvert S225T Circulating Pump(1-Pc Volute) Manf. # S225T-6 Also Manufactured under the following numbers: 601249 S225T 34-325-1000 Description Stainless Steel and Bronze Submersible hot tub pumps This is suitable for use in salt water, chlorinated water, fresh water, and hot water. These circulation pumps are also thermally protected, can be used in open air, operate very quietly, and are suitable in a wide range of applications. Standard cord length is 6 ft unless otherwise indicated. Flow 225GPH Suction 1/2 in. npt Discharge 1/4 in. npt Amps.7amp Price $ 182.72	Click to Order

	Calvert S320-20 Circulating Pump W/20Ft Cord Manf. # S320-20 Also Manufactured under the following numbers: 34-325-1058 Description Stainless Steel and Bronze Submersible hot tub circulation pumps This is suitable for use in salt water, chlorinated water, fresh water, and hot water. These pumps are also thermally protected, can be used in open air, operate very quietly, and are suitable in a wide range of applications. Standard cord length is 6 ft unless otherwise indicated. Comes with 20 ft cord. Flow 320GPH Suction 1/2 in. npt Discharge 1/4 in. npt Amps 1.5amp Price $ 217.84	Click to Order

Calvert S320T Circulating Pump
Manf. # S320T-6

601253
S320T
34-325-1050

Description
Stainless Steel and Bronze Submersible hot tub pumps
This is suitable for use in salt water, chlorinated water, fresh water,
and hot water. These pumps are also thermally protected, can be used in
open air, operate very quietly, and are suitable in a wide range of applications.
Standard cord length is 6 ft unless otherwise indicated.
Flow 320GPH
Suction 1/2 in. npt
Discharge 1/4 in. npt
Amps 1.5amp

Price $ 196.78

Calvert S580T Circulating Pump
Manf. # S580T-6

601252
S580T
34-325-1100

Description
Stainless Steel and Bronze Submersible hot tub pumps
This is suitable for use in salt water, chlorinated water, fresh water,
and hot water. These circulation pumps are also thermally protected, can be used in
open air, operate very quietly, and are suitable in a wide range of applications.
Standard cord length is 6 ft unless otherwise indicated.
Flow 580GPH
Suction 3/4 in. npt
Discharge 1/2 in. npt
Amps 2.0amp

Price $ 288.14

Calvert S580T Circulating Pump, W/50 ft. cord
Manf. # S580T-50

34-325-1105

Description
Stainless Steel and Bronze Submersible hot tub pumps
This is suitable for use in salt water, chlorinated water, fresh water,
and hot water. These circulation pumps are also thermally protected, can be used in
open air, operate very quietly, and are suitable in a wide range of applications.
Standard cord length is 6 ft unless otherwise indicated. Comes with 50ft cord.
Flow 580GPH
Suction 3/4 in. npt
Discharge 1/2 in. npt
Amps 2.0amp

Price $ 351.36

Calvert S1200T Hot Tub Circulating Pump 120V
Manf. # S1200T-20V

S1200T
34-325-1150

Description
Stainless Steel and Bronze Submersible hot tub pumps
This is suitable for use in salt water, chlorinated water, fresh water,
and hot water. These circulation pumps are also thermally protected, can be used in
open air, operate very quietly, and are suitable in a wide range of applications.
Standard cord length is 6 ft unless otherwise indicated.
Flow 1200GPH
Suction 3/4 in. npt
Discharge 1/2 in. npt
Amps 3.3amp

Price $ 351.36

Calvert S900T Hot Tub Circulating Pump 120V
Manf. # S900T-6

601251
S900T
34-325-1125

Description
Stainless Steel and Bronze Submersible hot tub pumps
This is suitable for use in salt water, chlorinated water, fresh water,
and hot water. These Circulating pumps are also thermally protected, can be used in
open air, operate very quietly, and are suitable in a wide range of applications.
Standard cord length is 6 ft unless otherwise indicated.
Flow 900GPH
Suction 3/4 in. npt
Discharge 1/2 in. npt
Amps 2.5amp

Price $ 309.20

Main Menu

Pump and motor (main pumps)

We carry replacment pumps and motors for most major hot tub brands.
Click on the link below to view our motor catalog.

Laing Hot Tub circulation pump

Laing Circulation Pump

Calvert Hot Tub circulation pump

Calvert Circulation Pump

Blower

Outdoor Air Blower

Commercial Air Blower, Rotron, Gast, Duralast
For hot tub and pool

Commercial Air Blower

Hot Tub Heaters

Hot Tub Heaters

Discover

Visa

Master Card

American Express

Debit Card

Calvert Hot Tub Circulation Pumps
by
Hot Tub Filters Unlimited
© All rights reserved.
1995

Thank you for visiting! Back to home